Forenza L4-2.0L (2004)
2. Insert the suction hose block-to-compressor to the compressor.
Tighten: Tighten the suction hose block-to-compressor retaining nut to 33 Nm (24 ft. lbs.).
3. Install the suction hose support clamp-to-longitudinal member.
Tighten: Tighten the suction hose support clamp-to-longitudinal member bolt to 4 Nm (35 in. lbs.).
4. Install the suction hose support clamp-to-engine bracket.
Tighten: Tighten the suction hose support clamp-to-engine bracket bolt to 14 Nm (10 ft. lbs.).
5. Install the suction hose block-to-expansion valve retaining nut at the fire wall.
Tighten: Tighten the suction hose block-to-expansion valve retaining nut to 14 Nm (10 ft. lbs.).
6. Connect the electrical connector at the pressure transducer.
7. Install the air cleaner housing bolts and the air filter housing assembly.
8. Connect the negative battery cable.