Forenza L4-2.0L (2004)
Stabilizer Link: Service and Repair
Rear Suspension
Stabilizer Link Removal and Installation
Removal
1. Raise and suitably support the vehicle.
2. Remove the wheel.
3. Remove the stabilizer shaft-to-stabilizer link nut.
4. Remove the stabilizer link-to-strut assembly nut.
5. Remove the stabilizer link.
Installation
1. Install the stabilizer link.
2. Install the stabilizer link-to-strut assembly nut.
^
Tighten the stabilizer link-to-strut assembly nut to 47 Nm (35 ft. lbs.).
3. Install the stabilizer shaft-to-stabilizer link nut.
^
Tighten the stabilizer shaft-to-stabilizer link nut to 47 Nm (35 ft. lbs.).
4. Install the wheel.
5. Lower the vehicle.