Forenza L4-2.0L (2004)
6. Clean the bore of the knuckle.
Installation
1. Install the outer snap ring and push the wheel bearing into place with the support bridge J-37105-B-1, the bearing adapter J-37105-B-2, the hex nut
500-20, and the forcing screw J-36661-2.
2. Install the brake shield.
3. Push the wheel hub into place with the hub adapter J-37105-B-3, the bearing adapter J-37105-B-2, the hex nut 500-20, and the forcing screw
J-36661-2.
4. Install the drive axle into the front wheel hub.