Forenza L4-2.0L (2004)
Wheel Hub: Service and Repair
Front Suspension
Hub and Bearing Removal and Installation
Tools Required:
500-20 Hex Nut
J-36661-2 Forcing Screw
J-37105-B-1 Support Bridge
J-37105-B-2 Bearing Adapter
J-377105-B-3 Hub Adapter
Removal
1. Remove the drive axle from the front wheel hub.
2. Remove the wheel hub with the support bridge J-37105-B-1, the hub adapter J-377105-B-3, the hex nut 500-20, and the forcing screw J-36661-2.
3. Remove the brake shield.
4. Remove the outer snap ring.
5. Remove the wheel bearing with the support bridge J-37105-B-1, the bearing adapter J-37105-B-2, the hex nut 500-20, and the forcing screw
J-36661-2.