Forenza L4-2.0L (2004)
Shift Cable: Service and Repair
Shift Control Cable Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the clip from the selector lever connection on the transaxle case and disconnect the shift control cable from the selector lever connection.
3. Remove the clip from the shift control cable at the transaxle mount connection.
4. Remove the floor console.
5. Loosen the shift control cable adjuster pinch nut.
6. Remove the shift control cable from the shift control assembly.
7. Remove the shift control cable from the transaxle mount.
8. Pull the shift control cable through the fire wall of the vehicle, bringing the rubber grommet with it.
Installation
1. Install the shift control cable into the fire wall of the vehicle.