Forenza L4-2.0L (2004)
10. Remove the automatic transmission output speed sensor mounting bolt under the valve body assembly.
11. Remove the control valve body.
Installation
1. Tilt the valve body.
2. Install the output speed sensor mounting bolt.
^
Tighten the output speed sensor mounting bolt to 6 Nm (53 inch lbs.).
3. Install the control valve body and the bolts.
^
Tighten the valve body mounting bolts to 8 Nm (71 inch lbs.).
4. Install the input speed sensor mounting bolt.
^
Tighten the input speed sensor mounting bolt to 8 Nm (71 inch lbs.).
