Grand Vitara 2WD V6-2.5L (2004)
7) Connect SUZUKI scan tool to data link connector (DLC) with ignition switch OFF.
Special Tool
(A): SUZUKI scan tool
8) Turn ignition switch to ON position and check actuator operation using HYDRAULIC CONTROL TEST under miscellaneous test (MISC. TEST)
mode of SUZUKI scan tool.
Follow the instructions indicated on the SUZUKI scan tool.
NOTE: For further details, refer to the operator's manual for SUZUKI scan tool.
9) Check that each wheel turns when only brake force is depressurized (about 0.5 seconds). If a faulty condition is found in Step 9), replace
hydraulic unit/control module assembly.