Grand Vitara 2WD V6-2.7L (2006)
9. Remove rear wheel hub assembly and brake back plate from knuckle.
Installation
1. Install brake back plate (1) and rear wheel hub assembly (2) to knuckle, and tighten wheel hub housing bolts to specified torque.
Tightening torque
Rear wheel hub housing bolt a: 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
2. Tighten rear axle nut (1) temporarily by hand at this step.
3. Install parking brake cable (1) to brake back plate and tighten cable cap nut to specified torque.
Tightening torque
Parking cable cap nut a: 11 Nm (1.1 kg-m, 8.0 ft. lbs.)