Grand Vitara 2WD V6-2.7L (2006)
Installation
1. Lubricate new grommets with the same fluid as the one to fill reservoir (1) with. Then press fit grommets (3) to master cylinder (2). Grommets (3)
must be seated in place.
2. Install reservoir (1) and drive in reservoir connector pin (2) by using special tool (A). Till both of its ends at the right and left of reservoir becomes
the same length.
Special Tool
(A): 09916-44310
3. Connect clutch reservoir hose (1) to reservoir (2) for M/T vehicle.
