Grand Vitara 2WD V6-2.7L (2006)
4. Connect brake pipes to master cylinder and tighten brake pipe flare nuts (1) to specified torque.
Tightening torque
Brake pipe flare nut for M10 a: 16 Nm (1.6 kg-m, 12.0 ft. lbs.)
Brake pipe flare nut for M12 a: 19 Nm (1.9 kg-m, 14.0 ft. lbs.)
5. Connect clutch reservoir hose (1) to reservoir (2) for M/T vehicle.
6. Connect reservoir lead wire at coupler.
7. Fill reservoir with specified brake fluid.
8. After installing, check brake pedal play and bleed air from brake and clutch system.
