Grand Vitara 2WD V6-2.7L (2006)
Replacement of the Tensioner Pulley
Replacement Procedure
4. To remove the Plastic Tensioner Pulley (1) from the H27A engine, loosen the tensioner pulley adjusting bolt (2) to relieve the tension on the power
steering/AC belt, removing it along with the tensioner pulley bolt (3), and then the tensioner pulley.
5. Install the new Steel tensioner pulley, tensioner pulley bolt (3) and adjuster bolt, tightening by hand. Based on which vehicle is being repaired and
the available tools, select the applicable method to adjust the belt tension from steps 6, 7, or 8, listed.
Belt Tension Adjustment
XL-7 (JA627) and Grand Vitara (JB627) Belt Deflection Method
