Grand Vitara 2WD V6-2.7L (2006)
11) Apply oil to bearing of idler sprocket No.1.
12) Install idler sprocket No.1.
Tightening torque
Idler sprocket No.1 bolt c: 55 Nm (5.5 kg-m, 40.0 ft. lbs.)
13) With latch of tensioner adjuster No.1 returned and plunger (1) pushed back into body, insert stopper (3) into latch (2) and body.
After inserting it, check to make sure that plunger (1) will not come out.
14) Install timing chain tensioner adjuster No.1 (1).
Tightening torque
Timing chain tensioner adjuster No.1 bolt a: 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
15) Pull out stopper (3) from adjuster No.1 (1).