Grand Vitara 2WD V6-2.7L (2006)
5) Install by aligning match marks (2) on yellow plate (1) of LH (No.1) bank 2nd timing chain and idler sprocket No.2.
6) Install sprockets to intake and exhaust camshafts by aligning silver plate (1) of LH (No.1) bank 2nd timing chain, match marks on intake sprocket
and exhaust sprocket respectively.
CAUTION:
Do not turn camshaft more than necessary. If turned excessively, valve and piston may get damaged.
7) Install LH (No.1) bank intake and exhaust camshaft timing sprockets.
To install it, fit a spanner to hexagonal part at the center of camshaft to hold stationary.