Grand Vitara 2WD V6-2.7L (2006)
Cabin Ventilation Duct: Service and Repair
Center Vent
CENTER VENTILATION LOUVER REMOVAL AND INSTALLATION
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system.
3. Remove center garnish with audio unit and HVAC control module.
4. Remove mounting screw (1) and then pull off center ventilation louver (2).
5. Disconnect connectors and remove center ventilation louver.
6. Remove center ventilation louver from center garnish.
Installation
Reverse removal procedure, noting the following item.
-
Insert backside of center ventilation louver to ventilator duct surely.
-
When installing center ventilation louver, align boss (1) and claws (2) with installation hole of instrument panel.
-
Enable air bag system.
