Grand Vitara 2WD V6-2.7L (2006)
Fuel Gauge Sender: Service and Repair
Sub Fuel Level Gauge
Sub Fuel Level Gauge Removal and Installation
CAUTION:
-
Do not touch resister plate (1) and deform arm (2). It may cause sub fuel level gauge to fail.
REMOVAL
1. Remove fuel tank from vehicle.
2. Disconnect sub fuel level gauge connector (1).
3. Remove sub fuel level gauge (2).
INSTALLATION
Reverse removal procedure for installation noting the following.
-
Replace O-ring with new one using care not to damage it.
-
Apply thin coat of fuel to O-ring, and then install sub fuel level gauge.
