Grand Vitara 2WD V6-2.7L (2006)
Throttle Body: Service and Repair
Electric Throttle Body Assembly Removal and Installation
Electric Throttle Body Assembly Removal and Installation
Reference: Intake Collector and Intake Manifold Components
Reference: Electric Throttle Body Assembly On-Vehicle Inspection
Removal
1) Release fuel pressure in fuel feed line by.
2) Disconnect negative (-) cable at battery.
3) Drain engine coolant.
4) Remove surge tank cover.
5) Remove intake air pipe (1), surge tank pipe (2) and IMT valve (3).
6) Disconnect connectors from electric throttle body assembly (1) and fuel injectors (2) of LH (No.1) bank.
7) Disconnect fuel connect pipe (1) from delivery pipe.
8) Disconnect water hose (2) from electric throttle body assembly.