Grand Vitara 2WD V6-2.7L (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Removal and Installation
REMOVAL
1. Disconnect negative cable at battery.
2. Disconnect connector from CMP sensor.
3. Remove CMP sensor (1) from timing chain cover.
INSTALLATION
Reverse removal procedure noting the following.
-
Tighten CMP sensor bolt to specified torque.
Tightening torque
CMP sensor bolt a: 11 N.m (1.1 kg-m, 8.0 lb-ft)
-
Connect CMP sensor connector securely.
2. Coolant reservoir tank