Grand Vitara 2WD V6-2.7L (2006)
Clockspring Assembly / Spiral Cable: Service and Repair
Contact Coil Cable Assembly Removal and Installation
Contact Coil Cable Assembly Removal and Installation
CAUTION: Do not turn contact coil cable assembly more than allowable number of turns (about two and a half turns from the center position
clockwise or counterclockwise respectively), or coil will break.
Removal
1. Remove steering wheel from steering column.
2. Remove steering column hole cover (1).
3. Remove steering column cover screws (1) (3 pieces).
4. Separate upper cover (2) and lower cover (3), then remove them.
5. Disconnect all connectors for contact coil cable assembly.
6. Remove contact coil cable assembly (1) with steering angle sensor (if equipped) from steering column.