Grand Vitara 2WD V6-2.7L (2006)
Impact Sensor: Testing and Inspection
With Advanced Air Bag
Forward-Sensor Inspection
Forward-Sensor Inspection
Reference: Forward-Sensor Removal and Installation:Advanced Air Bag
WARNING: During service procedures, be very careful when handling a sensor.
-
Never strike or jar a sensor.
-
A sensor and mounting bracket bolts must be carefully torqued to assure proper operation. Under loose connection, it could cause
improper operation of the air bag system.
CAUTION:
-
Never disassemble forward-sensor.
-
Sensor should be replaced when it was dropped from a height of 90 cm (3 ft) or more.
-
Check sensor for dents, cracks or deformation.
-
Check sensor connector (sensor side and harness side) and sensor connector lock mechanism for damage or crack.
-
Check connector terminals for bend, corrosion or rust.
Side-Sensor Inspection
Side-Sensor Inspection
Reference: Side-Sensor Removal and Installation:Advanced Air Bag
WARNING: During service procedures, be very careful when handling a sensor.
-
Never strike or jar a sensor.
-
A sensor and mounting bracket bolts must be carefully torqued to assure proper operation. Under loose connection, it could cause
improper operation of the air bag system.
CAUTION:
-
Never disassemble side-sensor.
-
Sensor should be replaced when it was dropped from a height of 90 cm (3 ft) or more.
-
Check sensor (1) for dents, crack, deformation.
-
Check sensor connector (sensor side and harness side), lock mechanism or sensor lead wire for damage, crack, scorching or melting.
-
Check connector terminals for bent, corrosion or rust.
If any faulty condition is found in above checks, replace.