Grand Vitara 2WD V6-2.7L (2006)
7. Connect adapter cable (B), (C) or (D) in series with deployment harness (A) to air bag (inflator) module or seat belt pretensioner as follows.
-
For driver air bag (inflator) module [A] Connect adapter cable (B) (For vehicle without cruise control system [B]) or (C) (For vehicle with
cruise control system [C]) in series with deployment harness (A) and push adapter cable (B) or (C) connector to driver air bag (inflator)
module connector till click can be heard.
-
For passenger air bag (inflator) module [D] Connect adapter cable (C) in series with deployment harness (A) and push adapter cable (C)
connector to passenger air bag (inflator) module connector till click can be heard.
-
For side-air bag (inflator) module [E] Connect adapter cable (B) in series with deployment harness (A) and push adapter cable (C) connector
to side bag (inflator) module connector till click can be heard.
-
For side curtain-air bag (inflator) module [F] Connect adapter cable (D) in series with deployment harness (A) to curtain bag (inflator) module
and lock connector with lock part.
-
For seat belt pretensioners [G] Connect adapter cable (D) in series with deployment harness (A) to seat belt pretensioner and lock connector
with lock part.
8. Route deployment harness (1) out of vehicle.
9. Check that inside of vehicle and area surrounding vehicle are clear of all people and loose or flammable objects.
10. Stretch deployment harness (1) to its full length 10 m (33 ft).
11. Place 12 volts vehicle battery (2) near shorted end of deployment harness (1).
