Grand Vitara 2WD V6-2.7L (2006)
Ignition Switch: Service and Repair
Removal and Installation
Ignition Switch Removal and Installation
Removal
1. Disconnect negative cable at battery.
2. Confirm that ignition key is removed.
3. Remove steering column hole cover (1).
4. Turn steering wheel to remove steering column cover screws (3) and then remove steering column covers (2).
5. Disconnect couplers (1) from ignition switch (2).
6. Remove ignition switch (2) from key cylinder (3).
Installation
Reference: Ignition Switch Inspection
Reverse removal procedure.
