Suzuki Workshop Service and Repair Manuals

Alternator: Service and Repair
Disassembled Inspection

Generator Inspection

Reference: Generator Dismounting and Remounting
Reference: Generator Disassembly and Assembly

Rotor

-

Using ohmmeter, check for continuity between slip rings of rotor. If there is no continuity, replace rotor.

Standard resistance between clip rings of rotor
2.0 - 2.3 Ohms at 20°C (68°F)

-

Using ohmmeter, check that there is no continuity between slip ring and rotor. If there is continuity, replace rotor.

Stator

-

Check resistance between the following leads of stator. if there is no continuity, replace stator.