Grand Vitara 2WD V6-2.7L (2006)
2. Adjust toe and camber to satisfy the specification by turning right and left control rod inner bolts (cam bolts) (1) with the same amount.
NOTE: When bolt is turned a-direction, camber becomes + and toe becomes IN. When bolt is turned b-direction, camber becomes - and toe
becomes OUT.
3. After adjustment, tighten right and left nuts to specified torque while holding cam bolt with another wrench to prevent it from turning.
Tightening torque
Control rod mount nut: 135 Nm (13.5 kg-m, 98.0 ft. lbs.)
Lower arm adjustment
1. Loosen right and left lower arm mount nuts (1).
