Grand Vitara 2WD V6-2.7L (2006)
Control Arm: Service and Repair
Front Suspension
Suspension Control Arm Removal and Installation
Suspension Control Arm Removal and Installation
Removal
1. Hoist vehicle and remove wheel.
2. Uncaulk drive shaft nut (1).
3. Depress foot brake pedal and hold it. Remove drive shaft nut (1).
4. Disconnect tie-rod end (1) from steering knuckle (2) with puller (3).
5. Loosen ball joint nut (1).
6. Remove suspension control arm bolts (1).
