Grand Vitara 2WD V6-2.7L (2006)
9. Remove front propeller shaft (if equipped).
10. Fix radiator (2) to body with rope (1) to avoid the radiator (2) fall off when front suspension frame lowered.
11. Support engine assemble as follows.
a. Remove hood.
b. Support engine assemble by using chain hoist.
12. Support suspension frame at the specified positions (1) indicated in figure.
WARNING: When removing suspension frame, be sure to apply some supporting equipment under it at well-balanced position as shown
in the figure section so as to prevent from its drop.
13. Remove engine front body side mounting nuts (1).
14. Remove suspension frame mounting bolts (2), and then lower suspension frame (3) with stabilizer bar, P/S gear box assembly and front differential
assembly (if equipped).
