Grand Vitara 2WD V6-2.7L (2006)
2. Install rear suspension frame stopper (3) to rear suspension frame bushing (1) and press-fit upper mount stopper washer (2) by using press with
bearing installer.
CAUTION: Be sure to use new upper mount stopper washer and rear suspension frame stopper.
NOTE: Use bearing installer in dimensions of outer diameter 43.0 to 49.0 mm (1.69 to 1.92 inch), inner diameter 41.0 mm (1.61 inch) or more
and length 21.0 mm (0.82 inch) or more.
Rear Suspension Frame, Bushing and Pad Check
Rear Suspension Frame, Bushing and Pad Check
Inspect for cracks, deformation or damage. If any faulty condition is found, replace.
