Grand Vitara 2WD V6-2.7L (2006)
Stabilizer Bushing: Service and Repair
Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Removal
1. Hoist vehicle and remove wheels (right & left).
2. Remove engine under cover.
3. Remove suspension control arm.
4. Remove right side and left side front drive shaft assembly (if equipped).
5. Remove stabilizer joints (1). When loosening joint nut, hold stud with hexagon wrench.
6. Disconnect steering lower shaft from pinion shaft.
7. Detach low pressure return hose (2) from low pressure return pipe (3) and then disconnect pipe bracket (1).
8. Remove gear box union bolt (1).