Grand Vitara 2WD V6-2.7L (2006)
10. After removing bolt (1) pull out transmission wire connector (2) from transmission case.
CAUTION: When pulling transmission wire harness out of transmission case, take care not to damage connectors and transmission fluid
temperature sensors at narrow exist of case. Careless sensor treatment might cause sensor malfunction.
Installation
Remove removal procedure to install transmission fluid temperature sensor, noting the following points.
^
Use new O-ring.
^
Tighten exhaust No.1 pipe bolts & nuts.
^
Fill A/T fluid and check fluid level according to procedure described in A/T Fluid Change.
^
Check for fluid leakage after warming up A/T.
