Grand Vitara 4WD L4-2.4L (2009)
6) When bubbles stop, depress and hold brake pedal and tighten bleeder plug.
Tightening torque
Front brake caliper bleeder plug: 7 Nm (0.7 kg-m, 5.0 ft. lbs.)
Rear brake caliper bleeder plug: 8 Nm (0.8 kg-m, 6.0 ft. lbs.)
7) Then attach bleeder plug cap.
8) After completing bleeding operation, apply fluid pressure to pipe line and check for leakage.
9) Replenish fluid into reservoir up to "MAX" level.
10) Check brake pedal for "sponginess". If found spongy, repeat entire procedure of bleeding.
