Grand Vitara 4WD L4-2.4L (2009)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir
Master Cylinder Reservoir Removal and Installation
CAUTION:
Do not allow brake fluid to get on painted surfaces. Painted surfaces will be damaged by brake fluid, flush it with water immediately if
any fluid is spilled.
Removal
1) Disconnect reservoir lead wire at coupler (1).
2) Clean outside of reservoir (2) and master cylinder (3).
3) Take out fluid with syringe or such.
4) Disconnect clutch reservoir hose (1) from reservoir (2) (M/T model).
