Grand Vitara 4WD L4-2.4L (2009)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
ECT (Engine Coolant Temperature Sensor Removal and Installation
Removal
1. Disconnect negative cable from battery.
2. Drain coolant.
3. Disconnect connector from ECT sensor.
4. Remove ECT sensor (1).
Installation
Reverse removal procedure noting the following.
-
Check O-ring for damage and replace if necessary.
-
Tighten ECT sensor to specified torque.
Tightening torque
ECT sensor (a): 12 N.m (1.2 Kg-m, 9.0 lbf-ft)
-
Connect connector to ECT sensor.
-
Refill cooling system.
-
Check for coolant leakage.
