Grand Vitara 4WD L4-2.4L (2009)
Engine Block Heater: Service and Repair
Cylinder Block Heater Removal and Installation (If Equipped)
Cylinder Block Heater Removal and Installation (If Equipped)
Removal
1) Disconnect negative (-) cable from battery.
2) Drain coolant.
3) Remove exhaust manifold cover.
4) Remove engine block heater (1).
Installation
^
Use new cylinder block heater bolts.
^
Tighten cylinder block heater bolts (1) to specified torque.
Tightening torque
Cylinder block heater bolt (a): 11 Nm (1.1 kg-m, 8.5 lbf-ft)
