Grand Vitara 4WD L4-2.4L (2009)
3) Install cylinder head cover to cylinder head.
NOTE:
When installing cylinder head cover, use care so that cylinder head cover gasket does not get out of place or fall off.
4) Tighten cylinder head cover bolts according to the following procedure.
a) Tighten cylinder head cover bolts to 3.0 Nm (0.31 kgf-m, 2.5 lbf-ft) in numerical order ("1" - "16") evenly and gradually.
b) In the same manner as Step a), retighten them to 5.0 Nm (0.51 kgf-m, 4.0 lbf-ft).
c) In the same manner as Step a), retighten them to 7.5 Nm (0.76 kgf-m, 5.5 lbf-ft).
