Grand Vitara 4WD L4-2.4L (2009)
Installation
1) Turn camshaft position key slot (1) within specified range (30 - 90 degrees) (2) in counterclockwise direction from top as shown in figure.
2) Align timing mark (3) on CMP actuator with match marks (4) on camshaft housing No.1.
3) Align timing mark (5) on exhaust camshaft timing sprocket with match marks (4) on camshaft housing No.1.
4) Install key (6) to key slot (1) of crankshaft.
a) Align key slot of crankshaft timing sprocket (7) with key, and then Install crankshaft timing sprocket to crankshaft.
b) Align timing mark (8) on crankshaft timing sprocket with match mark (9) on lower crank case.
