Grand Vitara 4WD L4-2.4L (2009)
Timing Cover: Service and Repair
Timing Chain Cover Removal and Installation
Timing Chain Cover Removal and Installation
CAUTION:
^
Keep working table, tools and hands clean while overhauling.
^
Use special care to handle aluminum parts so as not to damage them.
^
Do not expose removed parts to dust. Keep them always clean.
Removal
1) Remove engine assembly from vehicle.
2) Remove crankshaft pulley bolt.
To lock crankshaft pulley (1), use special tool as shown in figure.
CAUTION:
^
Use special tool to avoid applying unnecessary load to timing chain, sprockets and any other related parts.
^
Use specified bolts (2) to install special tool to crankshaft pulley. Bolt size: M8 Pitch: 1.25 mm
Length: 25 mm (0.98 in.)
Strength: 7T
Special Tool
(A): 09917-68221
3) Remove crankshaft pulley (1).
If it is hard to remove, use special tools as shown in figure.
Special Tool
(A): 09944-36011
(B): 09926-58010
