Grand Vitara 4WD L4-2.4L (2009)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Refrigerant Pressure Sensor Removal and Installation
Removal
1. Recover refrigerant from the A/C system with the recovery and recycling equipment referring to "Recovery" in Operation Procedure for Charging
A/C with Refrigerant.
2. Disconnect negative (-) cable from battery.
3. Disconnect A/C refrigerant pressure sensor connector.
4. Remove A/C refrigerant pressure sensor (1) from liquid pipe (2).
Installation
-
Apply compressor oil to O-ring of A/C refrigerant pressure sensor.
-
Tighten A/C refrigerant pressure sensor (1) to specified torque.
Tightening torque
A/C refrigerant pressure sensor (a): 11 N.m (1.1 kg-m, 8.0 lbf-ft)
