Grand Vitara 4WD L4-2.4L (2009)
2. Disconnect sub fuel level sensor connector (1).
3. Remove sub fuel level sensor (2) from fuel tank.
Installation
Reverse removal procedure for installation noting the following.
-
Check that mating surface of sub fuel level sensor is clean.
-
Replace gasket with new one using care not to damage it.
-
Tighten sub fuel level sensor screws to specified torque.
Tightening torque
Sub fuel level sensor screw: 1.6 N.m (0.16 kg-m, 1.5 lbf-ft)
