suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

"4" Position Switch Inspection|Page 2695 > < "4" Position Switch Inspection|Page 2693
Page 3
background image

3) Check that engine starts in "N" and "P" ranges but it doesn't start in "D", "4", "3", "L" or "R" range. Also, check that back-up light lights in "R"

range.
If faulty condition cannot be corrected by adjustment, disconnect transmission range sensor connector and check that continuity exists as shown by
moving select lever.

"4" Position Switch Inspection|Page 2695 > < "4" Position Switch Inspection|Page 2693