Grand Vitara 4WD L4-2.4L (2009)
10. Remove injector from special tool (A) and disconnect special tool (C) from injector.
WARNING:
As fuel feed line is still under high fuel pressure even after inspection, removing injector directly may cause dangerous spout of fuel.
Before removing injector, make sure to relieve fuel pressure as follows.
1. Stop operation of fuel pump.
2. Put graduated cylinder under injector.
3. Apply battery voltage to injector until no fuel is injected from injector.
11. Carry out Steps 3) through 10) on each injector to obtain four readings.
12. After checking, remove special tools from fuel injector and fuel feed hose.
13. Connect fuel feed hose to fuel delivery pipe.
14. Install fuel injectors to cylinder head.
15. Check for fuel leaks.
