Grand Vitara 4WD L4-2.4L (2009)
Crankshaft Position Sensor: Testing and Inspection
Crankshaft Position (CKP) Sensor On-Vehicle Inspection
CKP (Crankshaft Position) Sensor On-Vehicle Inspection
1. Disconnect connector of CKP sensor.
2. Turn ignition switch to ON position and check that voltage of CKP sensor connector (vehicle side) between terminals "1" and "2" is battery
voltage.
If faulty condition is found, check power supply circuit, ground circuit and connections.
3. Check that CKP sensor signal is output properly. If faulty condition is found, check the following.
-
Wire harness and connections
-
CKP sensor