Grand Vitara 4WD L4-2.4L (2009)
2. Connect the SUZUKI SDT (A) to the data link connector (DLC)(1), located on underside of instrument panel to the right of the steering column.
3. Turn ignition switch to ON position.
4. Read DTC according to instructions displayed on SUZUKI SDT.
Note:
Be sure to check for both current and history DTC's
5. If the DTC B1318 is detected as either a current or history code, proceed to the next step. If any DTC(s) are stored and not B1318, stop here and
refer to the Service Manual for diagnosis of that DTC(s).
6. After completing the check, turn ignition switch to OFF position and disconnect SUZUKI SDT from DLC.
