suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - Steering and Suspension > < Fuse Box No.2 (In Power Integration No.1, Power Integration No.2), Relay Box|Page 285

Grand Vitara 4WD L4-2.4L (2009)

Page 1
background image

Starter Relay: Testing and Inspection

Starting Motor Control Relay Inspection

1. Disconnect negative (-) cable from battery.
2. Remove starting motor control relay (1) from fuse box No.2.
3. Check that there is no continuity between terminal "C" and "D".

If there is continuity, replace starting motor control relay.

4. Connect service wire between battery positive (+) terminal and relay terminal "B". Connect service wire between battery negative (-) terminal and

relay terminal "A".
Check for continuity between terminal "C" and "D".
If there is no continuity when relay is connected to the battery, replace starting motor control relay.

Relays and Modules - Steering and Suspension > < Fuse Box No.2 (In Power Integration No.1, Power Integration No.2), Relay Box|Page 285