Grand Vitara 4WD L4-2.4L (2009)
Air Bag: Removal and Replacement
Driver Air Bag (Inflator) Module Removal and Installation
Driver Air Bag (Inflator) Module Removal and Installation
WARNING: When handling an air bag (inflator) module, be sure to read Precautions on Handling and Storage of Air Bag System
Components:Advanced Air Bag and observe each instruction. Failure to follow them could cause a damage to the air bag (inflator) module or
result in personal injury.
Removal
1. Disconnect negative (-) cable at battery.
2. Disable air bag system. Refer to Disabling Air Bag System:Advanced Air Bag.
3. Remove steering wheel side caps (2).
4. Loosen driver air bag (inflator) module mounting bolts (1) till it turns freely, pull them out and fix them to bolt clamps.
5. Remove air bag (inflator) module from steering wheel.
6. Disconnect driver air bag (inflator) module connector (1) of driver air bag (inflator) module as shown in the figure.
a. Unlock lock button (2).
b. With lock button unlocked, disconnect connector.
