Grand Vitara 4WD L4-2.4L (2009)
Air Bag: Testing and Inspection
Advanced Air Bag
Driver Air Bag (Inflator) Module Inspection
Driver Air Bag (Inflator) Module Inspection
WARNING: Never disassemble air bag (inflator) module or measure its resistance. Otherwise, personal injury may result.
CAUTION: If air bag (inflator) module was dropped from a height of 90 cm (3 ft) or more, it should be replaced.
Check air bag (inflator) module visually and if any of the following is found, replace it with a new one.
-
Air bag being deployed
-
Trim cover (pad surface) (1) being cracked
-
Inflator case (2) being damaged or having been exposed to strong impact (dropped)
-
Bend or deformity of air bag (inflator) module bracket.
Passenger Air Bag (Inflator) Module Inspection
Passenger Air Bag (Inflator) Module Inspection
WARNING:
-
Never measure resistance of passenger air bag (inflator) module or disassemble it. Otherwise personal injury may result.
-
Never attempt to disassemble or repair the passenger air bag (inflator) module. If any abnormality is found, be sure to replace it with new
one as an assembly.
-
Be sure to read Precautions on Service and Diagnosis of Air Bag System:Advanced Air Bag, Precautions on Handling and Storage of Air
Bag System Components:Advanced Air Bag and Precautions on Disposal of Air Bag and Seat Belt Pretensioner:Advanced Air Bag before
starting to work and observe every precaution during work. Neglecting them may result in personal injury or undeployment of the air
bag when necessary.
