Grand Vitara 4WD L4-2.4L (2009)
Seat Belt: Testing and Inspection
Rear Seat Belt Inspection
Rear Seat Belt Inspection
WARNING: Be sure to read Precautions on Service and Diagnosis of Seat Belt before starting to work and observe every precaution during
work.
-
Check the rear seat belt in the same way as Front Seat Belt Inspection. See: Front Seat Belt Inspection
-
As to seat belts with A-ELR, check them as follows.
-
With vehicle at stop, pull seat belt all the way out, let it retract a little and try to pull it. It should not be pulled out, that is, it should be locked
where retracted.
-
Let seat belt retract to its original state. Next, pull it half way out, let it retract a little and try to pull it again. It should be pulled out smoothly,
that is it should not be locked at this time.