Grand Vitara 4WD L4-2.4L (2009)
oil etc. does not get on the deployed air bag (inflator) module and the activated seat belt pretensioner.
-
After the air bag (inflator) module has been deployed, the surface of the air bag may contain a powdery residue. This powder consists primarily of
cornstarch (used to lubricate the bag as it inflates) and by-products of the chemical reaction. As with many service procedures, you should wear
gloves and safety glasses.
-
Remove the activation gas from its tube (1) for disposing of activated seat belt pretensioner as follows.
-
The gas may issue out of the hole together with chips generated by the drill (2). Therefore, be sure to wear goggle when drilling.
-
Using a 3.0 mm (0.1 in.) drill (2), make hole on tube (1) of seat belt pretensioner to remove inner gas as shown before disposing.
