suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4924 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Power Steering Fluid: Component Tests and General Diagnostics

P/S Fluid Level Check

P/S Fluid Level Check

With engine stopped, check fluid level indicated on P/S fluid reservoir, which should be between "UPPER" and "LOWER" marks. If it is lower than
"LOWER" mark, fill fluid up to "UPPER" mark.

NOTE:

^

Be sure to use an specified power steering fluid. 

^

Fluid level should be checked when fluid is cool.

P/S Fluid Leakage Check

P/S Fluid Leakage Check

Start engine and turn steering wheel fully to the right and left so that maximum hydraulic pressure is provided. 
Then visually check P/S gear case assembly (1), P/S pump (2) and P/S fluid reservoir (3) themselves and each joint of their connecting pipes for
leakage.

CAUTION:

Never keep steering wheel turned fully for longer than 10 seconds.

Initial Inspection and Diagnostic Overview|Page 4924 > < Initial Inspection and Diagnostic Overview