Grand Vitara 4WD L4-2.4L (2009)
Installation
1) Install lower arm.
a) Install lower arm (1) to rear suspension frame.
b) Insert suspension lower arm inner bolt (2) from the vehicle rearward.
c) Install lower arm washer (3) with its graduated part facing up.
d) The marks (4) on lower arm washer (3) and rear suspension frame marked before its removal must be aligned and, tighten bolt and nut
temporarily by hand.
CAUTION:
If lower arm mount nut and lower arm outer bolt is reused, apply engine oil to thread, bearing and trunk surface.
