Grand Vitara 4WD L4-2.4L (2009)
Installation
1) When installing stabilizer, loosely assemble all components while insuring that stabilizer is centered, side-to-side.
2) Install stabilizer bar (1), stabilizer bushing (2) and stabilizer mounting bracket (3) to suspension frame.
NOTE:
^
For correct installation of stabilizer bar, side-to-side, be sure that stopper ring (5) on stabilizer bar aligns with stabilizer bushing, both right and
left, as shown in figure.
^
Install stabilizer bushing so that a cut (6) becomes forward.
3) Tighten stabilizer bar mounting bracket bolts (4) to specified torque.
Tightening torque
Stabilizer bar mounting bracket bolt (a): 50 Nm (5.0 kg-m, 36.5 lbf-ft)
