Grand Vitara 4WD L4-2.4L (2009)
4-Speed Automatic Transmission
A/T Fluid Level Check
At Normal Operating Temperature
1) Drive vehicle so that A/T fluid temperature reach the normal operating temperature (70 - 80 °C (158 - 176 °F)).
2) Stop vehicle with engine running and place it level.
3) With select lever at "P" range, apply parking brake and place chocks against wheels.
4) Keep engine idling and shift selector slowly to "L" and back to "P" range.
5) With engine idling, pull out dipstick (1), wipe it off with a clean paper towel and put it back into place.
6) Pull out dipstick (1) again and check fluid level indicated on it. Fluid level should be between FULL HOT and LOW HOT. If it is below LOW
HOT, add specified A/T fluid up to FULL HOT.